前言：ASA,韩国英力士苯领,777K UV,ASA韩国英力士苯领,韩国英力士苯领777K
商品描述价格说明联系我们规格25kg/包加工定制否有效成分含量丙烯酸酯、丙烯腈、苯乙烯颜色本色形态粒子品名ASA产地韩国等级正牌料牌号777K加工级别注射成型特性高流动性● 高热变形温度● 良好的加工性销售方式代理经销品牌英力士苯领Styrolution Luran? S 777 K UV Black 56625 ASAASA PolymerStyrolution产品说明：Description: Easy flowing injection molding grade with good toughness and heat distortion resistance.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS物性信息：物理性能额定值 (公制)额定值 (英制)测试方法密度1.07 g/cc0.0387 lb/in?ISO 1183吸水率1.65 %1.65 %Equilibrium; ISO 620.45 %@Time 86400 sec0.45 %@Time 24.0 hourISO 62平衡吸湿0.35 %0.35 %23°C/50% RH; ISO 62线性成型收缩率,Flow0.0040 - 0.0070 cm/cm0.0040 - 0.0070 in/in熔体流动速率16.05 g/10 min@Load 10.0 kg, Temperature 220 °C16.05 g/10 min@Load 22.0 lb, Temperature 428 °FISO 1133机械性能额定值 (公制)额定值 (英制)测试方法球压硬度80.0 MPa@Load 36.5 kg, Time 30.0 sec11600 psi@Load 80.5 lb, Time 0.00833 hourISO 2039-1抗张强度(屈服)48.0 MPa6960 psi50 mm/min; ISO 527-1/-2伸长率 (断裂)9.0 %9.0 %Nominal, 50 mm/min; ISO 527-1/-2屈服伸长率3.3 %3.3 %50 mm/min; ISO 527-1/-2拉伸模量2.30 GPa334 ksiISO 527-1/-2弯曲强度70.0 MPa10200 psiISO 178悬壁梁缺口冲击强度1.80 J/cm3.37 ft-lb/inASTM D256简支梁无缺口冲击强度9.00 J/cm?@Temperature -30.0 °C42.8 ft-lb/in?@Temperature -22.0 °FISO 179/1eU25.0 J/cm?@Temperature 23.0 °C119 ft-lb/in?@Temperature 73.4 °FISO 179/1eU简支梁缺口冲击强度0.400 J/cm?@Temperature -30.0 °C1.90 ft-lb/in?@Temperature -22.0 °FISO 179/1eA1.70 J/cm?@Temperature 23.0 °C8.09 ft-lb/in?@Temperature 73.4 °FISO 179/1eA拉伸蠕变模量(1000 hr)1400 MPa@Strain <=0.500 %203000 psi@Strain <=0.500 %ISO 899-1电气性能额定值 (公制)额定值 (英制)测试方法体积电阻率1.00e+12 ohm-cm1.00e+12 ohm-cmIEC 60093表面电阻1.00e+13 ohm1.00e+13 ohmIEC 60093介电常数3.4@Frequency 1.00e+6 Hz3.4@Frequency 1.00e+6 HzIEC 602503.7@Frequency 100 Hz3.7@Frequency 100 HzIEC 60250介电强度35.0 kV/mm889 kV/inK20/P20; IEC 60243-1耗散因数0.011@Frequency 100 Hz0.011@Frequency 100 HzIEC 602500.024@Frequency 1.00e+6 Hz0.024@Frequency 1.00e+6 HzIEC 60250相比耐漏电起痕指数(CTI)600 V600 VTest Liquid A; IEC 60112热性能额定值 (公制)额定值 (英制)测试方法线形热膨胀系数 - 流动80.0 - 110 ?m/m-°C@Temperature 23.0 - 80.0 °C44.4 - 61.1 ?in/in-°F@Temperature 73.4 - 176 °FISO 11359-1/-2导热系数0.170 W/m-K1.18 BTU-in/hr-ft?-°FDIN 52612-1最高工作温度, Air85.0 °C185 °F载荷下热变形温度(0.46 MPa)101 °C214 °FISO 75-1/-2载荷下热变形温度(1.8 MPa)97.0 °C207 °FISO 75-1/-2维卡软化温度97.0 °C207 °FVST/B/50; ISO 306105 °C221 °FVST/A/50; ISO 306可燃性(UL94)HB@Thickness 1.60 mmHB@Thickness 0.0630 inIEC 60695-11-10HB@Diameter 4.00 mmHB@Diameter 0.157 inIEC 60707加工性能额定值 (公制)额定值 (英制)测试方法加工（熔体）温度240 - 280 °C464 - 536 °FInjection模具温度40.0 - 80.0 °C104 - 176 °FInjectionASA韩国英力士苯领777K UV 特性高流动性● 高热变形温度● 良好的加工性