前言：ASA,德国巴斯夫,778T UV ,ASA德国巴斯夫,德国巴斯夫778T UV
商品描述价格说明联系我们规格25加工定制否有效成分含量100厂家巴斯夫股份有限公司产地德国型号778T UV品种ASA塑料用途汽车领域加工方式注射成型销售方式品牌经销供应商博琪塑胶代理一级代理颜色本色 黑色品名巴斯夫ASA品牌德国巴斯夫特性耐候级 注塑级 高流动产品说明：Luran S 778 T is an injection molding ASA grade with enhanced toughness and heat resistance.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS.物性信息：物理性能额定值 (公制)额定值 (英制)测试方法密度1.07 g/cc0.0387 lb/in?ISO 1183吸水率1.65 %1.65 %ISO 62平衡吸湿0.35 %0.35 %23°C/50% R.H.; ISO 62线性成型收缩率0.0055 cm/cm0.0055 in/inASTM Data; MD线性成型收缩率,Flow0.0045 cm/cm0.0045 in/inISO Data线性成型收缩率，横向0.0090 cm/cm0.0090 in/inISO Data熔体流动速率1.1 g/10 min@Load 3.80 kg, Temperature 230 °C1.1 g/10 min@Load 8.38 lb, Temperature 446 °FASTM Test5.0 g/10 min@Load 10.0 kg, Temperature 220 °C5.0 g/10 min@Load 22.0 lb, Temperature 428 °FISO 11335.0 g/10 min@Load 10.0 kg, Temperature 220 °C5.0 g/10 min@Load 22.0 lb, Temperature 428 °FASTM Test机械性能额定值 (公制)额定值 (英制)测试方法洛氏硬度（R 级）110110ASTM Test抗张强度(屈服)49.0 MPa7110 psi2 in/min; ASTM Test54.0 MPa7830 psi50mm/min; ISO 52724.0 MPa@Temperature 80.0 °C3480 psi@Temperature 176 °FISO Data79.0 MPa@Temperature -40.0 °C11500 psi@Temperature -40.0 °FISO Data伸长率 (断裂)8.0 %8.0 %50mm/min, Nominal strain; ISO 52720 %20 %2 in/min; ASTM Test屈服伸长率3.4 %3.4 %50mm/min; ISO 5272.2 %@Temperature 80.0 °C2.2 %@Temperature 176 °FISO Data5.0 %@Temperature -40.0 °C5.0 %@Temperature -40.0 °FISO Data拉伸模量2.36 GPa342 ksiASTM Test2.50 GPa363 ksi1mm/min; ISO 527弯曲强度71.0 MPa10300 psiASTM Test80.0 MPa11600 psiISO Data弯曲模量2.50 GPa363 ksiASTM Test悬壁梁缺口冲击强度0.370 J/cm@Temperature -40.0 °C0.693 ft-lb/in@Temperature -40.0 °FASTM Test2.50 J/cm@Thickness 3.17 mm4.68 ft-lb/in@Thickness 0.125 inASTM Test简支梁无缺口冲击强度25.0 J/cm?119 ft-lb/in?ISO 1799.00 J/cm?@Temperature -30.0 °C42.8 ft-lb/in?@Temperature -22.0 °FISO 179简支梁缺口冲击强度1.50 J/cm?7.14 ft-lb/in?ISO 1790.400 J/cm?@Temperature -30.0 °C1.90 ft-lb/in?@Temperature -22.0 °FISO 179落锤总能量47.0 J34.7 ft-lbASTM Test冲击试验44.0 J32.5 ft-lbInstrumented Dart Impact (Energy at Peak Force); ASTM Test拉伸蠕变模量(1000 hr)1250 MPa181000 psiISO 899电气性能额定值 (公制)额定值 (英制)测试方法体积电阻率>= 1.00e+12 ohm-cm>= 1.00e+12 ohm-cmIEC 60093表面电阻>= 1.00e+13 ohm>= 1.00e+13 ohmIEC 60093介电常数3.5@Frequency 1.00e+6 Hz3.5@Frequency 1.00e+6 HzIEC 602503.9@Frequency 100 Hz3.9@Frequency 100 HzIEC 60250介电强度35.0 kV/mm889 kV/inIEC 60243-1耗散因数0.0090@Frequency 100 Hz0.0090@Frequency 100 HzIEC 602500.033@Frequency 1.00e+6 Hz0.033@Frequency 1.00e+6 HzIEC 60250相比耐漏电起痕指数(CTI)600 V600 VIEC 60112热性能额定值 (公制)额定值 (英制)测试方法线形热膨胀系数 - 流动95.0 ?m/m-°C52.8 ?in/in-°FISO 11359载荷下热变形温度(0.46 MPa)106 °C223 °Fannealed; ASTM Test106 °C223 °FISO 75载荷下热变形温度(1.8 MPa)103 °C217 °Fannealed; ASTM Test103 °C217 °FISO 75维卡软化温度ASA德国巴斯夫778T UV